If you are looking for a way to mount a television on drywall, this article will guide you through the steps involved. We will show you what materials you need and how to complete the project.
What is Drywall?
Not many people are aware of what drywalls are even though they have seen them time and again. Drywall is a type of wallboard that is made from gypsum, and it’s typically used in walls and ceilings. Gypsum is a naturally occurring mineral found in many places around the world, including in caves. It’s also produced commercially for use in drywall.
Gypsum has been used for centuries to make plaster and other types of wallboard. It wasn’t until the late 1800s that it was discovered that gypsum could also be used to make drywall.
Drywall is made from a mixture of natural minerals—calcium sulfate, magnesium sulfate, and calcium carbonate—that are mixed together with an adhesive called Portland cement. This mixture is then pressed into sheets before being cut into shapes and assembled into walls or ceilings using fasteners such as nails or screws.
Drywall comes in many different colors and textures, but the most common colors are white and yellow. White drywall is usually used for ceilings because it reflects light well, which makes rooms feel brighter than other colors might. Yellow drywall is commonly used for walls because it looks nice when you’re looking at it from across the room or even when you’re standing right next to it—it just looks more natural than other colors of drywall would look, like blue or green.
What materials are needed to mount a TV on a drywall
Screws: Screws can be purchased in bulk at hardware stores or online. They can be used with drywall anchors made specifically for this purpose. These anchors are sold in different sizes and shapes depending on how many screws you want to use. You’ll need at least two anchors per screw hole size on your TV mount (so if your TV has four holes for mounting screws you’ll need four anchors).
Drill bit: A drill bit will help you make holes in the wall for your new TV mount; however, drill bits are sold in bulk as well so you may already have one handy! If not, look for a set of five drill bits at your local hardware store or supermarket. You’ll need one each size from #3 up through #8; they come in packs of five pieces each.
Drywall anchors: These are small plastic pieces that can be used to secure the wall studs in place. They are usually provided with the drywall itself. If not, you can purchase them separately at your local home improvement store or online.
Wall studs: These are the horizontal pieces of wood that help hold up your walls and support the weight of your TV. You will need to use them to make sure that the screws go into solid wood and not into paint or wood filler!
Mortar or compound: You’ll need a good mix of mortar or compound to hold your TV in place while it dries. The best mortars are made with a blend of Portland cement and sand, and they are available at most home improvement stores.
Stud finder: If you don’t already have one, consider buying a stud finder so that you can avoid hitting anything else when you’re hanging your TV.
Types of mounts that can be used on a drywall
1. C-Channel Mounts
C-Channel is a type of drywall mount that is commonly used for mounting devices such as televisions or speakers to walls or ceilings. It is made up of two pieces: a channel, which runs along the length of the piece, and a screw, which goes into the channel and holds it in place. There are two types of c-channel mounts: standard and flush mount.
2. Standard C-Channel Mounts
Standard C-Channel mounts are designed to hold devices that weigh between 8 pounds and 55 pounds in weight. They’re most commonly used for mounting TVs, but they can also be used to mount computers or other electronics. Standard c-channel mounts come in three sizes: small (up to 10 pounds), medium (11 pounds to 55 pounds), and large (55 pounds and up). To use these mounts effectively, you’ll need a drill bit with an appropriate size and depth bit; an electric or hand drill; screws; wall anchors.
3. Half-round mount
The half-round mount has an adhesive backing and a vinyl coating on one side. This means that it’s much more durable than the standard mount, but it’s also more difficult to install.
4. Flush mount
The flush mount uses pressure-sensitive adhesive to secure itself to the surface without leaving any residue behind. This makes it great for preventing damage to walls during installation, and it’s also easy to remove if needed.
Step by Step instructions on mounting a TV to a drywall
Mounting a TV to the drywall is a relatively simple process, but it requires attention to detail and planning.
Before you start, you’ll want to make sure that your TV fits in the space you want it to be mounted. This can be done by measuring the distance between the top of your television and the ceiling and then finding out what type of mount kits are available for that size of the TV. You will also need to consider how you plan on running cables from your TV down through its legs and into your entertainment center or wall-mounted cabinet.
Step 1: Determine where you want the TV on the wall and mark centers as well
The first step to mounting a TV to hardiplank is to survey the wall and take measurements to determine the best position for the TV and mark where you’d like the bottom of the TV to rest.
Also measure out the length of the wall, determine the center and mark it out as well because this is where the center of the mount is going to rest.
Step 2: Fix TV mounting hooks to the back of TV
The next step is to use the right screws to fix the TV mount hooks to the back of the TV and make certain that it is attached securely.
Step 3: Measure distance from bottom of TV to hooks and record value
Measure the distance from the bottom of the TV to the inside curve of the TV mounting hooks and record the number.
Step 4:
Put tape measure on the wall with one end on the mark we made for the bottom of the Tv in step 1 and the other end measuring out the number we recorded for step 3.
When you’re done measuring out the length, mark the point visibly because this is where the top edge of the TV mounting bracket is going to sit.
Step 5:
Place either the TV mounting bracket or the TV mounting bracket template on the wall with the center of the mount resting around the center mark that was made in step 1 and the top edge of the mount resting on the mark that was made in step 4.
The template or mounting bracket must rest on the marks from Step 1 and Step 4 simultaneously.
Mark the holes where the screw will go in 4 places evenly distributed to properly hold the weight of the TV.
These holes are where you’re going to drill in order to feed the anchors into the wall.
Step 6:
Feed anchors into the wall according to the instructions on the box and ensure that they are snug and tight before breaking off the excess depending on what anchor you use.
Step 7:
Re-align the mount again with the anchor holes and screw in the anchor screws into the holes to secure the mounting bracket to the wall.
Ensure that all screws are tightly screwed into the wall.
Step 8:
With the assistance of someone else, lift up the TV high enough to slide the TV mounting hooks into the wall mounting bracket and ensure that the TV is securely mounted to the wall.
Step 9:
Hide wires as necessary.
After all of these steps have been completed, your TV is ready to be watched. and you can rest assured that it is secure enough and your TV is safe.
What to consider before mounting your TV on Drywall
1. Weight of TV – Although modern technology has made televisions lighter, it’s still important to use the right-sized fasteners when mounting them on the wall. Each brand and model of television varies in weight; however, an average 32-inch TV weighs between 25 and 30 pounds. Check your owner’s manual for the actual weight and load capacity of the anchors you’re using to ensure it stays on the wall.
2. Drywall condition – If you have an aging or deteriorating drywall, it may bow and bend with the added weight of your TV and mounting bracket, causing a potentially dangerous situation where the wall anchors could pull out and your TV crash to the floor.
3. Type of wall mount – VESA-compliant wall mounts are used to attach a television to the wall. You’ll need to ensure that the mounting brackets are rated for your specific size and weight. Wall mounts should never exceed the width or height of your TV. Different styles of mounting brackets will be rated for different sizes of TVs—fixed support may handle a larger, heavier unit vs. a full-motion kind that may max out at a lower weight capacity.
4. Use a stud finder to look out for studs – A typical home will have external studs spaced 16″ on center for interior walls and 24″ on center for exterior walls. Rooms are divided with standard spacing of 16″ on center for interior walls and 24″ on center for exterior walls. As these studs are hidden behind drywall, you’ll need to locate them (if available) with a stud finder. Lay the stud finder flat on the wall where you want to position your TV mount and turn it on. Slowly move it across the wall from left to right until it beeps or lights up. Note the location with a pencil mark and continue along the wall until you find all of your studs. If there are no studs, you’ll need to use special anchor bolts or screws to affix your mounting bracket.
5. Static or Tilted mounts – Static mounts are attached to the wall in one position and cannot be adjusted. This is the most affordable design and easiest to install. The fixed type will work best if you plan to mount it at eye level (approximately 42” off the ground), don’t need access to the rear ports, and don’t plan on moving it. Tilting versions will work better if you intend to mount it above eye level as they give you an optimal viewing angle plus help reduce glare and reflections from windows and lamps. They can also be pushed flat against the wall when not in use.
Conclusion
Congratulations! You have successfully mounted your TV on drywalls. This is a great way to make your home more relaxing and comfortable, especially if you’ve got a lot of family or friends coming over. Even though there are some tips and tricks that can make mounting easier, we’ve found that the basics work best: use the right tools for the job, be patient, and don’t rush it—this is one of those things where less is more.